. Composite Horizontal Line Post Insulator in Silicone Rubber Type RL-FC-*
Dimensions tolerance acc,to IEC61952
NOTE:Once chosen the insulator that is the most suitable to the characteristics of the line on which you have to install it,in order to obtain the total length of the insulator(L),please select the kind of fitting end you have to use and refer to the following table:
Specified Cantilever Load SML-IEC61952
Max.Design Cantilever Load MDCL=65%of SCL
Specified Tensile Load(STL) 15kN
Max.design compression 15kN
Max.torsion Load 15daN*m
The SCL can be increased,please contact us.
The metal fittings can be in aluminium or galvanized steel
*Key to the catalogue numbers
*Key:ISI-FC-A(1)-A(2)
Example:ISI-FC-A4+3-HCGB
Please don't hesitate to contact us directly for obtaining possible explanations or different solutions.
These insulators are produced and tested according to IEC61952. It's possible to have all the other combinations.
. Composite Horizontal Line Post Insulator in Silicone Rubber Type RL-FC-*
Dimensions tolerance acc,to IEC61952
NOTE:Once chosen the insulator that is the most suitable to the characteristics of the line on which you have to install it,in order to obtain the total length of the insulator(L),please select the kind of fitting end you have to use and refer to the following table:
Specified Cantilever Load SML-IEC61952
Max.Design Cantilever Load MDCL=65%of SCL
Specified Tensile Load(STL) 15kN
Max.design compression 15kN
Max.torsion Load 15daN*m
The SCL can be increased,please contact us.
The metal fittings can be in aluminium or galvanized steel
*Key to the catalogue numbers
*Key:ISI-FC-A(1)-A(2)
Example:ISI-FC-A16+15-HCGB
Please don't hesitate to contact us directly for obtaining possible explanations or different solutions.
These insulators are produced and tested according to IEC61952. It's possible to have all the other combinations.
|
